Contract #:  Seaport-e Award -- N00178-15-D-8484

Contract Type:  IDIQ

Coverage:   Zone 1, Zone 2, Zone 3, Zone 4, Zone 5, Zone 6, Zone 7

ENGINEERING, TECHNICAL, AND PROGRAMMATIC SERVICES



To meet Sea Power 21 objectives and to increase efficiency, the Naval Sea Systems Command (NAVSEA) Warfare Centers established the SeaPort-e Multiple Award Contract (MAC) vehicle. This contract vehicle utilizes a web-based, e-business procurement portal to facilitate performance-based service acquisition, leverage buying power, improve business intelligence, and reduce cycle time.

The ordering community of SeaPort-e was expanded in 2004 to include all Virtual Systems Command (SYSCOM) activities. Other activities, including the Military Sealift Command, Strategic Systems Programs, Defense Threat Reduction Agency (DTRA), and the United States Marine Corps have also chosen to use SeaPort-e.

Virtual Computing Technology will provide services in response to task orders issued under this contract by the Naval Sea Systems Command, Naval Air Systems Command, Space and Naval Warfare Systems Command, Naval Supply Systems Command, Military Sealift Command, Naval Facilities Command, Strategic Systems Programs, and the United States Marine Corps that potentially span the entire spectrum of mission areas supported by the activities and technical capabilities that comprise the various ordering offices. Additionally, activities may provide limited support under this contract to other U.S. Department of Defense (DoD), non-DoD, or joint agencies for work that is integrally related to product areas and mission.

VCT TASK ORDERS



The following SeaPort-e Task Orders have been awarded to Virtual Computing Technology:



TO NUMBER TITLE AWARD DATE POTENTIAL VALUE ZONE
001 Minimum Obligation 04/02/2015 $2,501.00 6

Quality Assurance Program



VCT integrates Quality Assurance from inception and throughout every phase of our projects. The primary methods of assuring the quality of services are appropriate advance planning, assignment of sufficient qualified staff resources, provision of appropriate tools, and establishment of rigorous program and project management techniques. Further, our collaborative method of developing detailed work plans for specific tasks will help assure the quality of support provided on each project task we conduct in support of the Warfare Centers, throughout all seven zones. In short, quality is not an “accessory”— it is embedded into every phase of the project.

Methods for integrating quality assurance during the execution of tasks are also part of our comprehensive approach. For that purpose, we have assembled a Quality Assurance Team (QAT) comprised of several of our most experienced professionals. This approach ensures that all required functional and technical knowledge is represented for the task orders, while simultaneously holding down costs. Any VCT team member can “tap” the expertise of our QAT throughout the duration of the contract. The team also serves as a quality control check for key deliverables and ensures an integrated approach to the recommendations. VCT quality management approach is designed to prevent, reduce, or eliminate problems that might compromise ability to perform on time, within budget, or according to the task order requirements. Our approach includes:

  • Developing a Quality Management Program Plan for the contract
  • Establishing and monitoring metrics for project objectives
  • Establishing quality management processes that include monitoring and assessing performance
  • Coordinating with the government stakeholders to establish quality objectives by deciding the scope and frequency of quality assessments and reporting policies
  • Coordinating with other contractors regarding quality management
  • Quality Assurance promotes the delivery of reliable, complete, and accurate work products by minimizing the transmission of errors through Quality Planning, Quality Control, and Quality Improvement processes.

The VCT approach to providing Quality Assurance establishes quality controls during the entire lifecycle of a project. In order to ensure quality of services and compliance, the Team will use an established set of standards and processes with which all team members agree to conform. The principles of these two important elements are established first in the subcontracting agreements, and, finally, in the QC Plan. Our standard TO management processes and risk mitigation strategies will be used to measure subcontractor performance. In addition, VCT will survey the team members on a semi-annual basis to determine the team’s performance and to invite recommendations to improve the in-place organizational structure and management processes. This will be supported by our in-place Service Level Agreement (SLA).

VCT TEAM MEMBERS



A description of each team member's capabilities and experience is available on their respective SeaPort-e portals, which can be visited by following the individual links below.

VCT Prime Contracting Partners include:
VCT Subcontracting Partners include:

Our Team Capabilities

Company Capabilities Last 3 years services experience listed by Functional Categories
GPA Technologies GPA is a multidiscipline engineering services company with successful experience providing high-quality, cost-effective, technical, management, and engineering services to government and commercial clients. They are recognized for technical excellence, qualified and well-trained personnel, quality assurance, and disciplined program management. Using automated management tools to the greatest extent possible. Presence in Zone 6. 3.1 Research & Development Support

3.4.  Prototyping, Pre-Production, Model-Making, and Fabrication Support

3.5 System Design Documentation and Technical Data Support


3.6 Software Engineering, Development, Programming, and Network Support


3.9 System Safety Engineering Support

3.10 Configuration Management


3.11 Quality Assurance (QA) Support


3.12 Information System (IS) Development, Information Assurance (IA) and Information Technology (IT) Support


3.16 Acquisition Logistics Support


3.17 Supply and Provisioning Support

3.18 Training Support


3.19 In Service Engineering Fleet Introduction Installation and Checkout Support

3.20 Program Support
 
IBM IBM is a Gartner top quadrant and information technology (IT) services company with extensive experience and capabilities directly and highly relevant to navy it, financial management (FM), business process engineering (BPR) and navy enterprise resource planning (ERP) solutions among others. We provide the navy with: (1) unmatched ability to support the navy program offices in integrating solutions with the navy ERP (2) Navy supply and maintenance business process subject matter knowledge; (3) more than 7 years of navy ERP SAP solution design, development, and deployment experience; (4) an extensive understanding of the challenges facing the Navy FM, ERP and BPR program; and (5) the necessary resources and infrastructure to achieve performance, schedule, and cost goals.   Presence in all 7 zones. 3.2 Engineering, System Engineering and Process Engineering Support

3.3 Modeling, Simulation, Stimulation, and Analysis Support

3.5 System Design Documentation and Technical Data Support

3.6 Software Engineering, Development, Programming, and Network Support

3.11 Quality Assurance (QA) Support

3.12 Information System (IS) Development, Information Assurance (IA) and Information Technology (IT) Support

3.14 Interoperability, Test and Evaluation, Trials Support

3.18 Training Support

3.20 Program Support
ORION Orion is a Large Business headquartered in Metro New York   area with offices in each of the seven (7) zones, over $150M in annual   revenues, and more than 500 employees. Orion through its recent acquisition   of Namtra Business Solutions, Inc. (NBS) – is a current Seaport “Enhanced” prime   contractor with contracts in Zones 1, 2, 3, 4, 5, 6 and 7 and strong relevant   past performance on multiple U.S. Navy contracts. Orion has successfully implemented more than 600 Information Technology   (IT), and professional services projects, and served more than 200 clients in   the private as well as the Government sector, over past 20 years. 3.2 Engineering, System Engineering and Process Engineering Support

3.3 Modeling, Simulation, Stimulation, and Analysis Support

3.5 System Design Documentation and Technical Data Support

3.6 Software Engineering, Development, Programming, and Network Support

3.10 Configuration Management

3.11 Quality Assurance (QA) Support

3.12 Information System (IS) Development, Information Assurance (IA) and Information Technology (IT) Support

3.14 Interoperability, Test and Evaluation, Trials Support

3.18 Training Support

3.20 Program Support

3.21 Functional and Administrative Support
System Edge System Edge, founded in the year 1995, and based in   Iselin, New Jersey, is a well-established Information Technology (IT) and   Engineering Services consulting company with more than 200 private and public   sector clients and 500 successful consulting contract implementations   in the United States, Europe and Asia. System   Edge has served several Federal, State Government agencies as well as Fortune   500 companies. System Edge has annual revenues of $8.5M, employs 85 people and has offices in multiple Zones.   Presence in all 7 zones. 3.2 Engineering, System Engineering and Process Engineering Support

3.3 Modeling, Simulation, Stimulation, and Analysis Support

3.5 System Design Documentation and Technical Data Support

3.6 Software Engineering, Development, Programming, and Network Support

3.10 Configuration Management

3.11 Quality Assurance (QA) Support

3.12 Information System (IS) Development, Information Assurance (IA) and Information Technology (IT) Support

3.14 Interoperability, Test and Evaluation, Trials Support

3.18 Training Support

3.20 Program Support

3.21 Functional and Administrative Support

SeaPort-e Contact Information



Dr. Cigi Oakley
Program Manager
coakley@vcomptech.com
P: 760-436-0922

Yvette Miller
Contracts Manager
ymiller@vcomptech.com
P: 310-600-1613

VCT NAICS CODES



Primary NAICS Code Description
511210 Software Publishers
519190 All Other Information Services
541330 Engineering Services
541370 Surveying and Mapping (except Geophysical)
541511 Custom Computer Programming Services
541512 Computer Systems Design Services
541513 Computer Facilities Management Services
541519 Other Computer Related Services
541611 Administrative Management and General Management Consulting
541618 Other Management Consulting Services
541620 Environmental Consulting Services
541690 Other Scientific and Technical Consulting Services
541711 Research and Development in Biotechnology
541712 Research and Development in the Physical, Engineering, and Life Sciences
561110 Office Administrative Services
561210 Facilities Support Services
561410 Document Preparation Services
611420 Computer Training